Rear Suspension Member Inspection

REAR SUSPENSION MEMBER

Inspection and Adjustment


INSPECTION AFTER REMOVAL

Check rear suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION

1.Adjust parking brake operation (stroke). Refer to "Inspection and Adjustment" Service and Repair.
2.Check wheel sensor harness for proper connection. Refer to "REAR WHEEL SENSOR : Exploded View" Exploded View
3.Check wheel alignment. Refer to "Inspection" Rear Suspension Alignment Inspection.

ADJUSTMENT AFTER INSTALLATION (WITH HBMC)

Bleed air from the HBMC. Refer to "Work Procedure" Air Bleeding Method.