Removal and Installation

FRONT COMBINATION LAMP

Removal and Installation


REMOVAL


CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1.Remove front grille. Refer to "Removal and Installation" Removal and Installation.
2.Remove front bumper molding. Refer to "Removal and Installation" Removal and Installation.
3.Remove front bumper fascia. Refer to "Removal and Installation" Removal and Installation.
4.Remove headlamp mounting bolts.
5.Pull out headlamp assembly forward vehicle.
6.Disconnect connectors before removing headlamp assembly.

INSTALLATION

Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to "description" Description.