Inspection After Removal

FRONT WHEEL HUB AND KNUCKLE

Inspection


INSPECTION AFTER REMOVAL

Check components for deformation, cracks, and other damage. Replace it if necessary.
Ball Joint Inspection
Check boots of lower link and steering outer socket ball joint for breakage, axial play, and torque. Refer to
"Inspection" Inspection and "Inspection" Inspection.

INSPECTION AFTER INSTALLATION

1.Check wheel sensor harness for proper connection. Refer to "FRONT WHEEL SENSOR : Exploded View" Exploded View.
2.Check the wheel alignment. Refer to "Inspection" Wheel Alignment Inspection.
3.Adjust neutral position of steering angle sensor. Refer to "Work Procedure" Work Procedure.