Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CAN GATEWAY

Work Procedure


1. SAVING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "Description" Description.
NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing CAN gateway.
- GO TO 2.

2. REPLACE CAN GATEWAY

Replace CAN gateway. Refer to "Removal and Installation" Service and Repair.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "Work Procedure" Work Procedure.
- WORK END