Rear A/C Unit Assembly

IN-VEHICLE SENSOR

REAR A/C UNIT ASSEMBLY : Removal and Installation


REMOVAL

1.Remove rear A/C unit assembly. Refer to "REAR A/C UNIT ASSEMBLY : Removal and Installation" Removal and Installation.
2.Remove the intake sensor from rear A/C unit assembly.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Replace O-rings with new ones. Then apply the compressor oil to them when installing.
- Mark the mounting position of intake sensor bracket prior to removal so that the reinstalled sensor can be located in the same position.
- Never rotate the bracket insertion part when removing and installing the intake sensor.
- Check for leakages when recharging refrigerant. Refer to "Leak Test" Leak Test.