Inspection and Adjustment

TRANSMISSION ASSEMBLY

2WD : Inspection and Adjustment


INSPECTION AFTER INSTALLATION

- Check A/T fluid leakage. Refer to "Inspection" Inspection.
- Check A/T position after adjusting A/T position. Refer to "Inspection" Procedures.

ADJUSTMENT AFTER INSTALLATION

- Adjust A/T fluid level. Refer to "Adjustment" Adjustment.
- Adjust A/T position. Refer to "Adjustment" A/T Position.
- Perform decel G sensor calibration when replacing A/T assembly. Refer to "Special Repair Requirement" Special Repair Requirement.