Alignment: Service and Repair

Fig. 3 Pivot Shaft Adjustment:

Camber & caster angle is adjusted by inverting the pivot shaft as shown in Fig. 3.
a. The distance between pivot shaft center and fitting face; H, can be adjusted 0.16 inch (4.0 mm) by inverting the pivot shaft.

Fig. 4 Shim selection chart:

b. The distance between the pivot shaft center and fitting shaft (side A or B) can be adjusted using shims selected by referring to the selection chart, Fig. 4.







Toe-in
To adjust toe-in angle, loosen lock nut on the outer track rod and turn outer track rod with the same degree as right and left, Fig. 3.