Rear Differential Reassembly - Manual Correction

90ISUZU05 BULLETIN NUMBER SB90-07-003
ISSUE DATE October 4, 1990
GROUP
PROPELLER SHAFT AND AXLE
TROOPER II (KT) REAR DIFFERENTIAL REASSEMBLY (WORKSHOP MANUAL CORRECTION)



AFFECTED VEHICLES

All Trooper II (KT) models.

SERVICE INFORMATION

Rear differential reassembly torque specifications are incoffectly printed in the following Workshop Manuals:


Manual Page No.

1990/91 Trooper II (KT) 07A-28
(Publication No. AIMI-SVC-207, part No. 2-90991-032-0)

1990 Trooper II (KT) 07A-29
(Publication No. AIMI-SVC-181, part No. 2-90990-032-0)

1989 Trooper II (KT) 07A-28
(Publication No. AIMI-SVC-177, part No. 2-90989-032-0)

1988 Trooper II (KT) 07A-27
(Publication No. AIMI-SVC-157, part No. 2-90988-032-0)

1987 Trooper II (KT) 07A-31
(Publication No. AIMI-SVC-147, part No. 2-90999-104-0)
Manual (Cont'd) Page No.

1986 Trooper II (KT) 07A-31
(Publication No. AIMI-SVC-115, part No. 2-90999-104-6)

1985 Trooper II (KT) 07A-31
(Publication No. AIMI-SVC-099, part No. 2-90999-104-5)

1984 Trooper II (KT) 07A-31
(Publication No. AIMI-SVC-079, part No. 2-90999-104-4)


This Service Bulletin contains corrected rear differential reassembly torque specifications.

NOTE The Friction Disc and Plate Assembly inspection procedure printed in 1989 and 1990 Trooper Workshop Manuals applies only to non-U.S. Isuzu vehicles. Disregard this inspection procedure.