Removal and Installation

REMOVE OR DISCONNECT
1. Nut (1).
2. Bolt (2).
3. Steering damper (3).
4. Nut (4).







5. Nut; pitman arm (5). Remove relay lever or pitman arm to shafts nut and lock washer.
6. Nut; relay lever (6). Remove the relay lever or pitman arm from the shaft using remover. Remover J-38345.







7. Intermediate rod (7). Remove split pin from the ball stud connecting outer track rod end. Remove the castellated nuts and disconnect the parts using remover. Tie Rod Remover : J-29107.

INSTALL OR CONNECT
1. Intermediate rod (7).
2. Nut; relay lever (6). Relay Lever Nut Torque 12.0 +/- 1.0 kgm ( 86.8 +/- 7.2 lb.ft / 117.7 +/- 9.8 Nm).
3. Nut; pitman arm (5). Pitman Arm Nut Torque 22.0 +/- 2.0 kgm ( 159.1 +/- 14.5 lb.ft / 215.8 +/- 19.6 Nm).
4. Nut (4).
5. Steering damper (3).
6. Bolt (2).
7. Nut (1). Steering Damper Torque 4.0 +/- 0.5 kgm ( 28.9 +/- 3.6 lb.ft / 39.2 +/- 4.9 Nm).