Disassembly of External Parts

MAJOR COMPONENT:
TRANSMISSION AND TRANSFER CASE ASSEMBLY

Disassembly Sequence:

Disassembly Steps
1. Speedometer driven gear
! 2. Transfer flange
! 3. Front cover with oil seal
! 4. Counter gear snap ring
! 5. Bearing snap ring
! 6. Transfer rear case assembly
7. Transmission and transfer case assembly

Important Operations !

NOTE: Details of the service procedure are provided for "Important Operations" only, marked with "!" above. Pay close attention to these steps.





2. Transfer Flange
Use the transfer flange holder to remove the transfer flange.
Transfer Flange Holder: J-37221





3. Front Cover with Oil Seal
Remove the front cover with oil seal from the transmission case.





4. Counter Gear Snap Ring
5. Bearing Snap Ring
Use a pair of snap ring pliers to remove the snap ring.