Oxygen (O2) Sensor

Caution: Use care when handling sensor. The electrical connector and louvered portion must be kept free of grease and dirt. Do not use cleaning solvents on sensor.

SERVICE INSTRUCTIONS
Before removal, allow engine temperature to cool below 48° C (120° F).
Before assembly, lightly coat threads with anti-seize compound.

REMOVE OR DISCONNECT
- Negative battery cable.
- Electrical connector.
- Sensor.

INSTALL OR CONNECT
- Sensor. Torque value: 41 Nm (30 ft.lb)
- Electrical connector.
- Negative battery cable.