Ignition Cable: Testing and Inspection

Wire X 1000 ohms
1 2.9 - 7.5
2 3.5 - 7.8
3 2.2 - 7.2
4 2.4 - 7.4
5 2.4 - 7.4
6 2.1 - 7.1
Coil 1.5 - 3.9

- Inspect the wires for contamination or swelling.
- Inspect the terminal ends for corrosion and looseness.
- Using an ohmmeter, check the resistance of each wire.
- Replace wires that fail inspections.