Turn Signals: Description and Operation

TURN OPERATION

With the ignition switch in ON or START, battery voltage is applied to the turn/hazard switch from fuse 7. When the turn/hazard switch is in the TURN position, battery voltage is applied to the flasher unit. Its output is pulsing voltage which is directed to either the RIGHT or LEFT position on the turn switch and causes the turn lights and turn indicator lights to flash in either direction.

HAZARD OPERATION

Battery voltage is applied to the turn/hazard switch at all times from fuse 3. When the turn/hazard switch is in the hazard position, battery voltage is applied to the flasher unit. Its output is pulsing voltage which is directed to the hazard switches and causes the turn lights and turn indicator lights to flash in both directions.