Front Wheel Speed Sensor

FRONT SPEED SENSOR

REMOVAL




1. Speed sensor connector
2. Sensor cable fixing bolt (Upper side)
3. Sensor cable fixing bolt (Lower side)
4. Sensor fixing bolt
5. Speed sensor

INSPECTION AND REPAIR
- Check the speed sensor pole piece for presence of foreign materials; remove any dirt, etc.
- Check the pole piece for damage; replace speed sensor if necessary.
- Check the speed sensor cable for short or open circuit, and replace with a new one if necessary. To check for cable short or open, bend or stretch the cable while checking for continuity.
- Check the sensor ring for damage including tooth chipping, and if damaged, replace the sensor ring assembly.

INSTALLATION
5. Speed sensor
- Take care not to hit the pole piece speed sensor during installation.
4. Speed sensor fixing bolt
- Tighten the fixing bolt to the specified torque.

Torque: 8 N.m (69 in.lb.)

3. Speed sensor cable fixing bolt (Lower side)
- Tighten the fixing bolt to the specified torque.

Torque: 24 N.m (18 in.lb.)

2. Speed sensor cable fixing bolt (Upper side)
- Tighten the fixing bolt to the specified torque.

Torque: 6 N.m (52 in.lb.)

- Confirm that a white line marked on the cable is not twisted when connecting the speed sensor cable.
1. Speed sensor connector