Manual Transmission/Transaxle

Component Torque/Ft. lbs.
Front Propeller Shaft 40-45
Flywheel 40 [01]
Pressure Plate Mounting Bolts 10-16 [02]
Rear Propeller Shaft 40-45
Starter Motor 50-70
Transmission Mount-To-Support Brace 55-65
Transmission-To-Engine 22-33

[01] -- Tighten in diagonal pattern. Do not reuse bolts & do not use Loctite when using M bolts.
[02] -- Tighten in diagonal pattern one or two turns at a time until seated, then apply final torque.