G-Sensor

G-SENSOR

REMOVAL




1. Center console
2. G-sensor wiring connector
3. G-sensor fixing bolt
4. G-sensor

INSPECTION AND REPAIR
1. Place the G-sensor on a level surface, and check the G-sensor for continuity between terminals.
^ If no continuity, replace with a new one.
2. Check the G-sensor for continuity when it is inclined by 30°.
^ If continuity, replace with a new one.

INSTALLATION
4. G-sensor
- Care should be taken so that the G-sensor is not installed in the wrong direction.
3. G-sensor fixing bolt
- Tighten the fixing bolt to the specified torque.

Torque: 6 N.m (53 in.lb.)

2. G-sensor wiring connector
1. Center console