F5 - Actuator Test (Engine Not Running)

The purpose of F5: Actuator Test Mode is to check for correct operation of Electronic System Actuators. By means of the TECH 1 you can command the Actuators "ON" and "OFF". Then you can check the Actuators for correct operation. Select the actuator by pushing the ("UP" Arrow) or ("DOWN" Arrow) key. (The * [asterisk] mark moves). For some Actuator tests the TECH 1 can automatically determine the correct function of the Actuators.

WARNING: Always put the parking brake on and block the wheels when using this test mode. The Engine should be "OFF" and the Ignition is "ON".