F0 - Data List

The purpose of the FO: Data List mode is to continuously monitor data parameters. The current actual values of all important Sensors and signals in the system are displayed through Mode FO. The displayed actual values must then be compared with the specifications listed in the checking instructions. From these the trouble can be clearly diagnosed. In the Quick Check list, all the test steps are summarized, so that (for example), after a mechanical/hydraulic problem, the electronic functions can also be quickly checked.

Active TECH 1 Keys:

YES & NO Scroll through displayed data parameters.
FO Mark the top display parameter as "fixed" for creating your own pairs.
F1 Mark the bottom display parameter as "fixed" for creating your own pairs.
F7 Change the display between MPH and KPH.
EXIT Return to "Select Mode" menu.








DATA LIST QUICK CHECK