Disassembly and Reassembly

DISASSEMBLY
1. Remove Distributor Cap.
2. Remove Distributor Rotor.
3. Remove Housing Gasket.
4. Remove Dust Bushing.
5. Remove Roll Pin.
6. Remove Pinion Gear and Gasket.
7. Remove Distributor Housing.


ASSEMBLY
To reassemble, follow the disassembly steps in the reverse order.

7. Distributor Housing.
6. Install Pinion Gear and Gasket.
5. Install Roll Pin.
4. Install Dust Bushing.
3. Install Housing Gasket.
2. Install Distributor Rotor.
1. Install Distributor Cap.