Ignition Control Module: Service and Repair

Coil Pack:

REMOVE OR DISCONNECT
1. Negative battery cable
2. "EI" electrical connectors (3)
3. Spark plug wires. (Note wire positions to proper coils) (6)
4. "EI" assembly to bracket bolts (3)
5. "EI" assembly from Intake Plenum.

INSTALL OR CONNECT
1. "EI" assembly bracket to Intake Plenum

Tighten
Bolts to 19 Nm (14 lb. ft).

2. Spark plug wires to correct spark plugs
3. "EI" electrical connectors
4. Negative battery cable