Ignition Cable: Service and Repair

Spark Plug Wires:

Spark Plug Wire Index:

REMOVAL

Preparation:
- Disconnect battery ground cable.

1. Spark plug wires

INSPECTION AND REPAIR
Check the high tension cable for insulation. Check terminals for corrosion or damage, and replace as necessary.

Diagnostic Chart:

Measure resistance of spark plug wires, and replace the cable if its value exceeds the standard.

INSTALLATION
1. Spark plug wires

Connect ignition coils and spark plugs with spark plug wires respectively. Match each number (cylinder No.) marked on the ignition coil with that on spark plug wire, and connect each spark plug for the cylinder.

- Connect battery ground cable,

Caution: Do not cross, twist or pull the spark plug wires.