Introduction

EXHAUST SYSTEM

CAUTION: This vehicle is equipped with Supplemental Restraint System (SRS). Refer to Technician Safety Information under Service Precautions before performing service on or around SRS components or wiring. Failure to follow CAUTIONS could result in possible air bag deployment, personal injury, or otherwise unneeded SRS system repairs.

Technician Safety Information

NOTE: Always use the correct fastener In the correct location. When you replace a fastener, use ONLY the exact part number for that application. Fasteners that require replacement after removal will be noted. Fasteners that require thread lockers or thread sealant will be noted. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and systems.