Troubleshooting Hints

1. Check condition of GAUGES Fuse (FUSE 4). If fuse is open, LOCATE and REPAIR source of overload. Replace fuse.
2. If fuse is not open proceed with diagnostics.
3. If panel illumination; turn signal indicators high beam indicator and safety belt indicator are all inoperative, check BLK (150) wire for an open.
4. If all indicators (except those noted in hint 3) and all gauges are inoperative, check PNK (39) wire for an open.
5. If all gauges are inoperative, check BLK/WHT (151) wire for an open.