Troubleshooting Hints

1. Check condition of TURN B/U (Fuse 16), STOP-HAZ (Fuse 1) and PK LPS (Fuse 3). If fuse is open, LOCATE and REPAIR source of overload. REPLACE fuse.
2. Check for proper installation of after-market electronic equipment which may effect the integrity of other systems.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.