Seat Belt, Lights-on and Key-In Ignition Warning System

Key-In Ignition Warning
When the key remind switch is closed, battery voltage is applied to the RED wire of the seat belt, key, and light remind buzzer. With the left front door open, ground is provided at the BLK/WHT wire of the remind buzzer and the buzzer sounds.

Seat Belt Warning
With the starter switch in ON or START, battery voltage is applied to the seat belt warning light from fuse CB-7. With the driver's seat belt unbuckled, the seat belt, key, and light remind buzzer senses ground at the GRN/YEL wire. With the starter switch in the ON position, the seat belt warning light turns ON for four to eight seconds. Also if the driver's seat belt is unbuckled, the remind buzzer will sound for the same amount of time.

Lights-ON Warning
When the starter switch is turned to the OFF position and the park lights are ON, the light switch applies battery voltage to the seat belt, key, and light remind buzzer at the GRN/RED wire. The remind buzzer will sound until the lights are turned OFF.