Control Module: Service and Repair

REMOVAL
Preparation: Disconnect Negative Battery Cable.

1. Remove the Front console
2. Remove the Wiring harness connector
- Disconnect the Powertrain Control Module (PCM) wiring harness connectors from PCM.




3. Remove the PCM.
- Remove two PCM retaining screws.
- Remove two brackets from PCM.


INSTALLATION
To install follow the removal steps in the reverse order.

3. Install the PCM.
- Install two brackets to PCM.
- Install two PCM retaining screws.

2. Install the Wiring harness connector.
- Connect PCM wiring harness connectors to PCM.

1. Install the Front console.
- Connect negative (-) battery cable.