Rear Wheel Speed Sensor

REAR WHEEL SPEED SENSOR





REMOVAL
1. Speed sensor connector
2. Clip
3. Sensor cable fixing bolt
4. Sensor fixing bolt




5. Speed sensor

INSPECTION AND REPAIR
- Check speed sensor pole piece for presence of foreign materials: remove any dirty, etc.
- Check the pole piece for damage, and replace speed sensor if necessary.
- Check speed sensor cable for short or open, and replace with a new one if necessary. To check for cable short or open, bend or stretch the cable while checking for continuity.
- Check the sensor ring for damage including tooth chipping, and if damaged replace the axle shaft assembly.

INSTALLATION
5. Speed sensor
- Take care not to hit the speed sensor pole piece during installation.
4. Sensor fixing bolt
- Tighten the fixing bolt to the specified torque.
Torque: 18 N.m (13 ft.lb.)

3. Sensor cable fixing bolt
- Tighten the fixing bolt to the specified torque.
Torque: 24 N.m (18 ft.lb.)
- Confirm that the cable is not twisted when connecting the speed sensor cable.

2. Clip
1. Speed sensor connector