Tilt Lever

1. Pull the tilt steering column lever out from the steering column by aligning the tilt steering column lever and push it into place.
2. Pull the shift lever seal away from the upper steering column trim cover in order to expose the shift lever screw.
3. Remove the screw that retains the shift lever to the steering column.
4. Detach the shift lever from the steering column.
5. Install the new shift lever into the steering column.
6. Screw in the screw that retains the shift lever to the steering column tightening it to 22 Nm (16 ft. lbs.).
7. Install the shift lever seal to the upper steering column trim cover.