Removal

NOTE: Raise the front of the vehicle and support the lower control arm with floor stands. Since the weight of the vehicle is used to relieve the spring tension on the upper control arm, the floor stands must be positioned between the spring seats and the ball joints of the lower control arms for maximum leverage.

CAUTION: Floor jack must remain under control arm spring seat during removal and installation to retain spring and control arm in position. Failure to do so could result in personal injury.

1. Remove the tire and wheel assembly.
2. Detach the upper ball joint from the steering knuckle taking care to support the rotor assembly to prevent its weight from damaging the brake hose.
3. Remove the upper control arm attaching bolts and nuts taking care to note the location of any shims.
4. Remove the upper control arm and inspect all parts for wear and damage.