Tube Adapters

Tube Adapters:

Remove or Disconnect
1. Disconnect appropriate brake line from tube adapters.
2. Tube adapter.

Install or Connect
1. Tube adapter.

- Tighten Tube adapter to 31 Nm (23 ft. lbs.)

2. Brake line.
3. Bleed the system. refer to Hydraulic Brake System, Service and Repair.

NOTE: If more than one tube adapter is to be removed at one time, the Brake Pressure Modulator Valve (BPMV) should be stamped with a number (1, 2, or 3) to correspond with the number of grooves cut into the tube adapters. This will aid in proper reassembly.