EVAP Canister Purge Solenoid Valve Replacement

EVAP Canister Purge Solenoid Valve Replacement Removal Procedure
1. Remove the purge valve electrical connector.
2. Remove the hoses to the purge valve.
3. Remove the purge valve from the mounting bracket.
4. When replacing the bracket, remove the purge valve mounting bracket attaching nut.
5. Remove the purge valve mounting bracket.

Installation Procedure
1. Install the purge valve mounting bracket and the attaching nut.

Tighten
Tighten the purge valve mounting bracket attaching nut to 610 N.m (53-88 lb in).

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Slide the purge valve into the mounting bracket.
3. Install the hoses to the purge valve.
4. Install the valve electrical connector.