Power Locks: Testing and Inspection

TROUBLESHOOTING HINTS:
1. Check CTSY (Fuse 2) by operating Horn and/or dome lamps.
2. Check PWR ACCY circuit breaker.
3. Check for mechanical binds in the Door Lock System.
4. Check that grounds G102, G104, G113, G115 and G116 are clean and tight.
5. If one motor does not operate, check CKT 294 and CKT 295 for the respective door. If OK, replace the Door Lock Actuator Motor.




Power Door Locks Do Not Operate From Either Switch




Power Door Locks Do Not Operate From Either Switch




Power Door Locks Lock And Unlock From One Switch Only




Power Locks Lock And Unlock From One Switch Only




Power Locks Do Not Lock




Power Locks Do Not Unlock