Headlights: Daytime Running Lights

Troubleshooting Hints:
Before checking the daytime running lamps system, do the following:
1. Place park brake in OFF position and Ignition Switch to RUN.
2. Verify condition of DRL/FOG and GAUGES Fuses. If open, locate and repair source of overload. Then replace fuse.
3. Place Headlamp Switch in ON and Headlamp Dimmer Switch in High Beam. If High Beam headlamp(s) are inoperative, refer to HIGH BEAM LAMP(S) DO NOT OPERATE diagnostic procedure.
If High Beam headlamps operate, place Headlamp Switch in OFF and use the following diagnostic procedure.

PAGE REFERENCE:

Low And High Beam Headlamps Are Inoperative




Low Beam Headlamps Inoperative, High Beam Headlamps Operate Normally




High Beam Headlamps Inoperative, Low Beam Headlamps Operate Normally.




High Beam Indicator Inoperative, But High Beam Headlamps Operate Normally.




One Low Beam Or One High Beam Headlamp Inoperative







Daytime Running Lamps Do Not Operate




Daytime Running Lamps