Replacement

1. Using special tool, drive out the valve guide from the combustion chamber side.
^ Using the valve guide replacer: J-37985 or equivalent.





2. Apply engine oil to the outside of the valve guide.
^ Using special tool, drive in a new valve guide from the camshaft side, and check the valve guide height.
^ Valve guide replacer: J-37985
^ Valve guide replacer adapter: J-39204
^ Or equivalents
3. Check the clearance. If the clearance is less than the specified value, ream the inside diameter of valve guide.
^ Using a sharp 6 mm reamer, ream the valve guide to obtain the specified clearance.