Connector

- The connector pin shape determines whether the connector is male or female. The connector housing configuration does not determine whether a connector is male or female.




- The symbol illustrated in the figure is used as connector, in the circuit of this section.




- Connector is identified with a number.




- The applicable terminal number is shown for each connector.




- Connector terminal numbers are clearly shown. Male side connector terminal numbers are in sequence from upper right to lower left. Female side connector terminal numbers are in sequence from upper left to lower right.

NOTE:




1. For those connectors on which specific terminal numbers or symbols are shown, such as ECM, the terminal numbers or symbols are used in the circuit diagram, regardless of the above rule.




2. The connectors used for relays have their own terminal number assignment, regardless of the above rule.