Brakes and Traction Control: Specifications
| Front | Rear | |
| Maximum Lateral Runout * All measurement must be made at 29 mm (1.14 in) from the edge of the rotor. | 0.005 Inch (in) | 0.005 Inch (in) |
| Parallelism (maximum variance)* All measurement must be made at 29 mm (1.14 in) from the edge of the rotor. | 0.0004 Inch (in) | 0.0004 Inch (in) |
| Minimum Wear Dimension | 0.969 Inch (in) | 0.654 Inch (in) |
| Minimum Refinish dimension | 0.983 Inch (in) | 0.668 Inch (in) |