Fuel Pump: Service and Repair

REMOVAL
Preparation:
- Disconnect Battery Ground Cable.
- Loosen Fuel Filler Cap.
- Drain Fuel.

1. Remove Fuel tank assembly (1), refer to Fuel tank removal.





2. Remove Fuel pump (2) assembly fixing screws and remove the fuel pump assembly.

NOTE: After removing fuel pump, cover fuel tank to prevent any dust from entering.

INSTALLATION
To install, follow the removal steps in the reverse order.

2. Install the Fuel Pump Assembly.
1. Install Fuel tank.
- Fill the tank with fuel and tighten fuel filler cap.
- Connect battery ground cable.