Front Differential

DIMENSIONS

Side Gear And Pinion Backlash 0.03-0.08 mm (0.001-0.003 inch)
Pinion And Cross Pin
Standard 0.06-0.12 mm (0.002-0.005 inch)
Limit 0.20 mm (0.008 inch)
Side Gear And differential Box
Standard 0.03-0.10 mm (0.001-0.004 inch)
Limit 0.15 mm (0.006 inch)
Play in Splines Between side Gear And Axle shaft
Standard 0.08-0.36 mm (0.0032-0.0141 inch)
Limit 0.5 mm (0.02 inch)


TIGHTENING SPECIFICATIONS

Filler Plug 78 Nm (58 ft. lbs.)
Pinion Flange Bolts 177-275 Nm (130-203 ft. lbs.)
Bearing Cap Bolts 98 Nm (72 ft. lbs.)