VSV Assembly

INSPECTION (1)
1. Remove connector.
2. Shift transfer lever to 2H and start the engine.

NOTE: The vehicle should not be started, with the engine idling.

3. Make sure that there is continuity in the vehicle side of harness. If there is no continuity, check transfer shift switch and wiring.





INSPECTION (2)
1. With Battery not Connected (Usual)
- A-C There is continuity
- B Closed
2. With Battery Connected
- A-B There is continuity
- C Closed
3. If 1. and 2. fail, replace with a new VSV.