System Specifications

TIGHTENING SPECIFICATIONS
Bearing Holder Mounting Nut 74 Nm (54 ft. lbs.)
Axle Shaft Runout (Limit) 1.0 mm (0.039 inch)
Inner Drive Pinion Bearing Nut 2.3 Nm (20 inch lbs.)
Bearing Caps 108 Nm (80 ft. lbs.)
Flange Nut 245-294 Nm (181-217 ft. lbs.)
Starting Torques:
New Bearing 0.7-1.3 Nm (6.08-11.28 inch lbs.)
Used Bearing 0.4-0.6 Nm (3.04-5.64 inch lbs.)
Ring Gear Backlash 0.15-0.2 mm (0.006-0.008 inch)
Ring Gear Runout :
Standard 0.02 mm (0.001 inch)
Limit 0.05 mm (0.002 inch)