Clutch: Specifications

SERVICE SPECIFICATIONS
Dust Cover Bolts 6 Nm (52 inch lbs.)
Clutch Set Force:
Standard 7208 N (1621 lbs.)
Limit 6669 N (1499 lbs.)
Spring Finger Height:
Standard 49.9-51.9 mm (1.965-2.043 inch)
Driven Plate:
Warpage:
Standard 0.7 mm (0.028 inch)
Limit 1.0 mm (0.039 inch)
Hub Spline Wear:
Standard 0.5 mm (0.020 inch)
Limit 1.0 mm (0.039 inch)
Rivet Head Depression:
Standard 1.6 mm (0.063 inch)
Limit 0.2 mm (0.08 inch)
Flywheel Bolts 54 Nm (40 ft. lbs.)
Fulcrum Bridge Bolts 38 Nm (28 ft. lbs.)
Pressure Plate 18 Nm (13 ft. lbs.)
Clutch Pedal:
Height (H2) 218.5-228.5 mm (8.602-8.996 inch)
Clutch Switch And Clutch Pedal:
Clearance 0.5-1.5 mm (0.020-0.059 inch)
Free Play 5-15 mm (0.20-0.59 inch)
Engagement Height (H3) (Minimum) 30 mm (1.18 inch)
Clutch Pedal To Dash Panel 21 Nm (15 ft. lbs.)
Clutch Pipe:
To Master Cylinder 20 Nm (14 ft. lbs.)
To Flex Hose 20 Nm (14 ft. lbs.)
To Damper Cylinder 12 Nm (104 inch lbs.)
To Slave Cylinder 20 Nm (14 ft. lbs.)