Timing Belt - Scrapping Old Inventory

BULLETIN NUMBER:
IB01-01-S002

ISSUE DATE:
JUNE 2001

GROUP:
ENGINE

HEC ENGINE TIMING BELT SCRAPPING

AFFECTED VEHICLES

1998 - 2000 Rodeo (UE) and Amigo (UA) models with 2.2L 4cyl engine

SERVICE INFORMATION

As a follow up from the 2.2L HEC Engine - Timing Belt Replacement Service Campaign 01I-002 (Refer to SBO1-01-S001), American Isuzu Motors Inc. (AIMI), would like to request that the following parts be removed from your parts inventory. In the Service Bulletin SB01-01-S001, we listed new parts required for replacement of the HEC Timing Belt for the 2.2L 4cyl engine on 1998 - 2000 Rodeo (UE) and Amigo (UA) models. Since we require the "NEW" HEC Timing Belt (included in Timing Belt Kit P/N 2-90000-915-0) to be installed, the following parts must be destroyed/scrapped or returned before a reimbursement is issued.





The "OLD" Timing Belt part numbers are as shown.

For dealers that report to the Business Resource Center (BRC), please return all OLD Timing Belts in dealer inventory and the completed form to the BRC.

NOTE:
Send old belts freight prepaid, a freight allowance has been established and should be indicated on the reimbursement form.

Business Resource Center
1100 Corporate Square Drive 2nd Floor
St. Louis, MO 63132

For the remaining dealers, your ZSPM/PC and Parts Manager must destroy/scrap all OLD Timing Belts in dealer inventory.

HOW TO SUBMIT FOR REIMBURSEMENT:





Use the form and complete with your Dealer Code, OLD Timing Belt parts quantity, total dealer cost for all OLD Timing Belts that were removed from inventory and destroyed/scrapped. Your ZSPM/DSM/PC must approve the reimbursement form and a credit will be processed under a separate invoice identified in the Isuzu Statement of Account.