Servicing Information

- Replace all parts and components included in the repair kits.
- Lubricate parts as specified.
- Do not use lubricated shop air on brake parts. Rubber component damage can result.
- After a hydraulic component has been removed or disconnected, if necessary, bleed all or part of the brake system.
- Replace shoes and linings in axle sets only.
- The torques specified are for dry, unlubricated fasteners.
- Perform service operations on a clean bench, free from mineral oil and other contaminants.
- Use extreme care when working around antilock components in order to prevent damage or misalignment.
- Before moving the vehicle, pump the brake pedal several times in order to make sure it is firm. Do not move the vehicle until a firm pedal has been obtained. Check the brake fluid level in the master cylinder after pumping the brakes.