Operation CHARM: Car repair manuals for everyone.

Connectors

Typical Harness Connector Faces:




The connectors are labeled with the component they are connected to, or the connector number. In addition the color of the connector is given along with the family/series name.

If you need to backprobe a connector while it is on the component, the order of the terminals must be mentally reversed. The wire color is a help in this situation. If there is more than one wire of the same color, you may need to locate a test point from its terminal number. A useful trick is to imagine that you are probing a terminal from behind the page you are looking at. Then mentally locate that terminal with respect to the keyway or other reference mark.