Oil Pump Removal

OIL PUMP REMOVAL

- Tools Required
- J37789-A Oil Pump Remover and Installer
- J39119 Oil Pump Remover and Installer Adapter





1. Remove all pump bolts (2).
2. Install J39119 over stator shaft until it locks under splines.
3. Install J37789-A.





4. Tighten the nut (1) with a wrench. This will tighten the J37789-A around the J39119.
5. Turn the T-handle on top of J37789-A.
6. Lift the pump out of the case.





7. Remove the pump cover to case gasket (6).