Component Tests and General Diagnostics

The following graphics illustrate the correct way to route the drive belt over the pulleys, and some examples of incorrect belt replacement.





1. Observe the drive belt correctly installed on the pulley.
Each groove on the drive belt rests inside a matching Groove in the pulley.





2. When installing a new drive belt, observe the indicator on the tensioner.
A new drive belt should fall inside this range.





3. When installing a used drive belt, observe the indicator on the tensioner.
A used drive belt should fall inside this range.





4. Observe these incorrectly installed drive belts:
Avoid mix-positioning the belt by one or more grooves.