Low and Reverse Clutch Support Removal and Installation

LOW AND REVERSE CLUTCH SUPPORT DISASSEMBLE, REMOVAL PROCEDURE





1. Remove the low and reverse roller clutch race (675) from the low and reverse clutch support (679). Inspect the race for damage and surface finish.
2. Remove the low and reverse roller retainer ring (677) and the low and reverse roller clutch assembly (678). Inspect the roller clutch assembly for damaged rollers and broken springs.
3. Inspect the low and reverse clutch support (679) for loose cam and cam surface finish. Check the support for cracks and damaged lugs.





4. Clean and install the low and reverse roller clutch assembly (678) into the low and reverse clutch support (679). Install the low and reverse retainer ring (677).

LOW AND REVERSE CLUTCH SUPPORT INSTALLATION





1. Install the low and reverse roller clutch race. Simultaneously, turn and insert the race.
2. Rotate the race in order to verify proper operation. The race should only rotate in one direction.





3. Install the low and reverse clutch support retainer spring (680) into the case.





4. Install the low and reverse clutch support (679), roller clutch and roller clutch race (675) assembly into the case. Position the hub side down during the installation.

Important: Align the wide low and reverse clutch support notch with the wide case lug.





5. Install the low and reverse support retainer ring (676) into the case.