Antenna Mast: Service and Repair

NOTE: The antenna mast can be removed without removing the antenna assembly.

1. Remove the antenna mast.

Mast Antenna Replacement:

2. Remove the antenna nut, spacer, and bushing.
3. Remove the right front inner fender.
4. Remove the antenna housing bracket bolt, then pull the housing out of the wheel well.

Mast Antenna Replacement:

5. If necessary, remove the two bolts from the housing, then separate the housing from the bracket.
6. Install in the reverse order of removal.

NOTE:
- When installing the antenna mast, tighten it to 3 N.m (0.3 kgf.m, 2.1 lbf.ft).
- First tighten the antenna nut, then tighten the antenna housing bracket.