Cylinder Head Assembly

Cylinder Head:

PART 1 OF 2

CAUTION:
^ To avoid damage, wait until the engine coolant temperature drops below 100°F (38°C) before removing the cylinder head.
^ When handling a metal gasket, take care not to fold it or damage the contact surface.

NOTE: Use new O-rings and gaskets when reassembling.

Camshaft And Rocker Arm:

PART 2 OF 2

Oil Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact parts.

NOTE: Clean the oil control orifice before installing.