Control Assembly: Adjustments

TEMPERATURE CONTROL CABLE

Temperature Control Adjustment:

1. Under the hood, disconnect the heater valve cable from the heater valve.




2. Under the dash, remove the clip and the heater duct from the heater unit.




3. Disconnect the air mix cable housing from the cable clamp.
4. Set the temperature control lever to MAX COOL.
5. With the air mix control cable attached to the air mix control arm, gently pull on the outer cable housing to fully close the door and to remove any slack in the cable, then snap the air mix control cable housing into the cable clamp.
6. Reinstall the heater duct and the clip on the heater unit.

Temperature Control Adjustment:

7. Under the hood, move the heater valve arm to the fully closed position, then attach the heater valve cable to the heater valve arm.
8. Hold the heater valve arm in the closed position and gently pull on the heater cable outer housing to take up any slack, then install the heater valve cable housing into the cable clamp.